Product Introduction

GQ50 rebar cutting machine is an ideal equipment for cutting. It can be applied to cut the normal carbon steel rod, hot rolled steel and deformed bar in machine processing and construction projects, also suit for square steel and flat steel.

Main Features

1.Enhanced machine rack, small volume, compact structure, solid and reliable.

2.Good lubricating property, adopt enclosed gear box, use the gear splashing to realize lubrication. It could be continuous work two months after adding 8kg gear oil.

3.Less loss because of the lubrication improvement. The gear section adopts rolling bearing, less resistance. Compared with same type of cutting machine, load power can be reduced by one third.

4.Using high rigid cutting head, connecting rod and high speed national standard motor, guaranteed a more stable quality and longer service life.

Main Technical Parameters

Model:GQ50 Rebar Cutting Machine

Voltage:3-380V  50Hz

Motor Speed:2880r/min

Motor Power:4.0Kw

Punching Frequency:32times/min

Cutting Nominal Stroke:34mm

Cutting Range:

Common Carbon Steel≤Φ50mm

GradeⅡDeformed Bar≤Φ40mm

Max Flat Steel: 85*16mm

Max Square Steel: 40*40mm

Max Angle Steel: 63*63mm

Weight:570kg±5kg

Dimension:1440*500*750mm

Warm Note

In order to prolong service life of the equipment and reduce the cost, please read the instruction manual carefully before operation and maintain the equipment according to signs. Change the OEM gear oil after the first use of 500 hours, then add the same grade gear oil.